Today's RTA vape came to me for a long time, but he did it. Firstly, I became interested in him due to the brand's outstanding status; secondly, because I remember this is Hellvape's first experience in a cigarette case.
Parameter
Case material: stainless steel
Atomizer type: RTA
Capacity: 2 / 4ml
Diameter: 23.5mm landing / 24.5 maximum / 26.8mm on bubble glass
Height: 33mm without drip type / 44.4 and 39.8mm with drip types
Connector: 510, pin gilded
Weight: 53.2g
Color: see photo below
Hellvape MD RTA looks pretty good-I basically like it. The decoration is moderate, not overused, the height is small, the corners are cut, and the risk is original. In short, even though this is not the top of the design, it turns out to be a very good tank. The only thing that puzzles me is the "strange diameter".
Not only do developers want decent cigarette holders-well, you can understand them here-developers want to make station wagons for hookahs and cigarette holders, but they also differ in diameter across the entire height of the tank.
There are two types of drip irrigation kits, both 510th floor type, made of Delrin. They are used only for different "styles" soaring and behave normally. Unless there is a statement for the MTL option-no, no, yes, it is welded to the condensate.
Of course, you can replace them with any instance with a similar landing diameter, that is, the area around the hole with a diameter of about 14 mm.
Capacity is standard capacity and may increase. This is more than enough for a cigarette holder and even for a modest single spiral hookah. However, when using the foam option, gently speaking, the appearance of the water vape tank as a cigarette is not important. The internal processing of the dome is spherical.
Related atomizer you may like:
horizon falcon 2
 |
| Hellvape MD RTA review |
Case material: stainless steel
Atomizer type: RTA
Capacity: 2 / 4ml
Diameter: 23.5mm landing / 24.5 maximum / 26.8mm on bubble glass
Height: 33mm without drip type / 44.4 and 39.8mm with drip types
Connector: 510, pin gilded
Weight: 53.2g
Color: see photo below
Hellvape MD RTA looks pretty good-I basically like it. The decoration is moderate, not overused, the height is small, the corners are cut, and the risk is original. In short, even though this is not the top of the design, it turns out to be a very good tank. The only thing that puzzles me is the "strange diameter".
Not only do developers want decent cigarette holders-well, you can understand them here-developers want to make station wagons for hookahs and cigarette holders, but they also differ in diameter across the entire height of the tank.
 |
| buy Hellvape MD RTA |
Of course, you can replace them with any instance with a similar landing diameter, that is, the area around the hole with a diameter of about 14 mm.
Capacity is standard capacity and may increase. This is more than enough for a cigarette holder and even for a modest single spiral hookah. However, when using the foam option, gently speaking, the appearance of the water vape tank as a cigarette is not important. The internal processing of the dome is spherical.
Related atomizer you may like:
horizon falcon 2
Comments
Post a Comment