Today let me recommend one new kit named Hugo
Vapor Squeezer BF Kit for you. Here comes Hugo Vapor Squeezer BF Kit! Squeezer
BF Kit consists of Squeezer MOD and N RDA. When you open the box, you will find
your Squeezer mod with a squonk bottle already installed. You also can find there
is a spare bag, an 18650 adapter, the N RDA, a user manual, a warranty card.
The mod has a gold-plated, spring-loaded
510 pin. The 510 does have a nice stiff spring to it with a very nice throw.
The threading around the 510 is stainless steel and feel very smooth. The ring
around the 510 connection has a circular cutout as well as straight cut outs in
order to get air flow to the bottom of your atomizer. Overall, the 510
connection give me much impression. The 510 plate have an extremely slight
raise above the top side of the mod. The top plate is large enough to
accommodate a 25mm atomizer with no overhang.
You will also find the squonking hole. It
is a really nicely sized squonking hole and I have had no issues getting any of
my fingers in there to squonk. It is very smooth around the edges of the hole. On
the left side of the mod, it is basically blank but there is one big oval
shaped hole for battery venting. The battery door slides off from the side and
to your surprise is there are no magnets, which can hold this battery door in
place very well. Once the battery door is off the mod, the whole mod is
basically open. With the battery door off, you will see your cell and the
squonking bottle. This bottle is extremely soft.
On the interior of the mod is where you
will find a stainless steel pin that your squonk bottle tube slips into and
enables you to squonk. And the 510 is a nice chunk of peek insulation. Above
the peek insulator is a gold-plated nut that keeps the 510 in place.
The fire button is made of the same material
as the rest of the mod. It is oval in shape and it does protrude from the body
of the mod. It does have a locking mechanism to it. In order to lock the fire
button, you simply slide it upwards and you will not be able to fire the mod.
In order to unlock it, you slide it downwards and you are ready to fire. In my
opinion, This is one of the best fire buttons on a mechanical squonker. It’s
just a very comfortable and safe button to use.
The N RDA included in your kit comes with a
great drip tip. It is an Ultem 810 drip tip that is wide bore and tall. This
drip tip is tall enough to keep your lips away from the top cap. It fits in the
top cap nice and snug. On the edges of the top cap, there is some light
knurling. Right below the knurling, there is one o’ring that holds the top cap
in place on the barrel. Towards the bottom of the interior of the top cap,
there are two cyclops style airflow cut outs. This is a dual coil RDA only. The
deck of this RDA has a two-post, one-terminal-per-post design and one post is
gold plated.
On the bottom of the RDA, there is no
branding and all we have is a blank stainless steel piece. The squonking pin
can be removed with a flat head screwdriver. There is an insulator ring around
the squonking pin. The threading around the squonking pin is stainless steel
and it is very smooth. Overall, it’s a nice design and it is a competent RDA.
Besides, In this kit, you will receive two
squonk bottles. One is the normal sort of cloudy, translucent bottle. The other
is a black, grayish, sort of bottle. Both of them are really super soft,
Both bottles have a really nice stainless
steel collar with some knurling around the bottom. The collar does detach from
the bottle for easy cleaning. The threading on the bottle cap is nice and
smooth and I have had no issues at all with it. Even the cap that goes on top
of the bottleneck has some knurling on it as well. The tubes included in the
bottle are pretty cut on an angle, so all you really have to do is fill the
bottle up and start squonking. They even put some Squeezer branding on each
bottle. Each bottle holds 10mls of juice.
Also included in your kit is a 30ml squonk
refill bottle. It is made of the same material as the included squonking
bottles and it also has some Squeeze branding on it. It’s very easy to refill
your squonking bottle especially when you are on the go.
All in all, the Squeezer BF Kit is
very comfortable to use, so do you want to have a try? Now it’s pre-sell on
vapesourcing at a good price. If you want to know about more pictures, please
click here: https://vapesourcing.com/hugo-vapor-squeezer-bf-kit-with-n-rda.html
Comments
Post a Comment